BG2500 Hydraulic Installation Tool
Part Number: BG2500
The BG2500 is an all-purpose installation tool for sizes up to 1/2″ diameter blind nuts and blind bolts. The gun is designed to work with the BP7000 or BH245A hydraulic pump. Weight just 5.5 lbs. The BG2500 has three control buttons in an ON (red), PULL (white), OFF (blue) sequence actuated with your thumb.
Mandrel, anvil and collet not included.
These drivers are used with standard socket wrenches or torque wrenches to install core bolts into the installed sleeve and expander of the blind nut.
| Insert Drivers | 1 PIECE DRIVERS | 2 PIECE DRIVERS | ||||||
|---|---|---|---|---|---|---|---|---|
| Blind Bolt first dash Number | Core Bolt recess type | 1/4" hex Insert bit part # | Square drive socket | HTS Series Part Number | Sq. drive socket | HTA Series Part Number | Sq. drive socket | HT3000M Series part number |
| >-5 | Phillips #1Frearson | 440-1X 440-FX | ||||||
-6 | Phillips #1Frearson | 400-1X 400-FX | ||||||
-8 | Phillips #2Frearson | 440-2X 400-FX | ||||||
-10 | Hi-torque #3 | 1/4" | HTS3 | 1/4" | HTA3 | 1/4" | HT3203M |
|
-12 | Hi-torque #4 | 3/8" | HTS4 | 3/8" | HTA4 | 3/8" | HT3304M |
|
-14 | Hi-torque #5 | 3/8" | HTS5 | 3/8" | HTA5 | 3/8" | HT3305M |
|
-16 | Hi-torque #6 | 3/8" | HTS6 | 3/8" | HTA6 | 3/8" 1/2" | HT3306M HT3406M |
|
The driving tools below will install the following blind nut part numbers:
BN359; BN359PB; BN514; BN520; BN520GA; BN538; BN545G; BN555; BN555G
Blind Nut first dash number | Anvil part number | "C" dia. | "M" dia. | Chuck part number | "M" dia. |
|---|---|---|---|---|---|
-832 | A25-832 | .380" | .166" | C2-8 | .166" |
-1024 | A25-1032 | .460" | .191" | C2-1032 | .191" |
-1032 | A25-1032 | .460" | .191" | C2-1032 | .191" |
-420 | A25-428 | .540" | .250" | C2-12 | .250" |
-428 | A25-428 | .540" | .250" | C2-12 | .250" |
-518 | A25-524 | .650" | .313" | C2-14 | .313" |
-524 | A25-524 | .650" | .313" | C2-14 | .313" |
-616 | A25-624 | .740" | .375" | C2-16 | .375" |
-624 | A25-624 | .740" | .375" | C2-16 | .375" |
Blind Nut first dash number | Min. Grip-1/2" grip range Mandrel part number | "D" dia. | "L" | 1/2" - 1" grip range Mandrel part number | "D" dia. | "L" | 1"- 2" grip range Mandrel part number | "D" dia. | "L" |
|---|---|---|---|---|---|---|---|---|---|
-832 | M01-8 | .164" | 2.00" | M1-8 | .164" | 2.50" | M2-8 | .164" | 3.50" |
-1024 | M01-1024 | .189" | 2.10" | M1-1024 | .189" | 2.60" | M2-1024 | .189" | 3.60" |
-1032 | M01-1032 | .189" | 2.10" | M1-1032 | 189" | 2.60" | M2-1032 | .189" | 3.60" |
-420 | M01-420 | .248" | 2.40" | M1-420 | .248" | 2.85" | M2-420 | .248" | 3.85" |
-428 | M01-12 | .248" | 2.40" | M1-12 | .248" | 2.85" | M2-12 | .248" | 3.85" |
-518 | M01-518 | .310" | 2.5" | M1-518 | .310" | 3.00" | M2-518 | .310" | 4.00" |
-524 | M01-14 | .310" | 2.5" | M1-14 | .310" | 3.00" | M2-14 | .310" | 4.00" |
-616 | M01-616 | .373" | 2.58" | M1-616 | .373" | 3.05" | M2-616 | .373" | 4.05" |
-624 | M01-16 | .373" | 2.58" | M1-16 | .373" | 3.05" | M2-16 | .373" | 4.05" |
Blind Nut first dash number | Anvil part number | "C" dia. | "M" dia. | Chuck part number | "M" dia. |
|---|---|---|---|---|---|
-832 | A26-832 | .380" | .166" | C2-8 | .166" |
-1024 | A26-1032 | .460" | .191" | C2-1032 | .191" |
-1032 | A26-1032 | .460" | .191" | C2-1032 | .191" |
-420 | A26-428 | .540" | .250" | C2-12 | .250" |
-428 | A26-428 | .540" | .250" | C2-12 | .250" |
-518 | A26-524 | .650" | .313" | C2-14 | .313" |
-524 | A26-524 | .650" | .313" | C2-14 | .313" |
-616 | A26-624 | .740" | .375" | C2-16 | .375" |
-624 | A26-624 | .740" | .375" | C2-16 | .375" |
Blind Nut first dash number | Min. Grip-1/2" grip range Mandrel part number | "D" dia. | "L" | 1/2" - 1" grip range Mandrel part number | "D" dia. | "L" | 1"- 2" grip range Mandrel part number | "D" dia. | "L" |
|---|---|---|---|---|---|---|---|---|---|
-832 | M2.5-8 | .164" | 4.00" | M3-8 | .164" | 4.50" | M4-8 | .164" | 5.50" |
-1024 | M2.5-1024 | .189" | 4.10" | M3-1024 | .189" | 4.60" | M4-1024 | .189" | 5.60" |
-1032 | M2.5-1032 | .189" | 4.10" | M3-1032 | 189" | 4.60" | M4-1032 | .189" | 5.60" |
-420 | M2.5-420 | .248" | 4.40" | M3-420 | .248" | 4.85" | M4-420 | .248" | 5.85" |
-428 | M2.5-12 | .248" | 4.40" | M3-12 | .248" | 4.85" | M4-12 | .248" | 5.85" |
-518 | M2.5-518 | .310" | 4.5" | M3-518 | .310" | 5.00" | M4-518 | .310" | 6.00" |
-524 | M2.5-14 | .310" | 4.5" | M3-14 | .310" | 5.00" | M4-14 | .310" | 6.00" |
-616 | M2.5-616 | .373" | 4.58" | M3-616 | .373" | 5.05" | M4-616 | .373" | 6.05" |
-624 | M2.5-16 | .373" | 4.58" | M3-16 | .373" | 5.05" | M4-16 | .373" | 6.05" |
The driving tools below will install the following blind nut part numbers:
BN155; BN157; BN158; BN360; BN360PB; BN360.64; BN372; BN372P; BN377; BN388; BN388L;
BN389; BN516; BN516PB; BN518; BN521; BN525; BN525GA; BN526; BN526NL; BN527; BN528;
BN532; BN535; BN536; BN537; BN537LK; BN543; BN553; BN556; BN556G; BN557; BN561; BN562;
BN563; BN564; BN565; BNB1100; BNB1101; BNB1102; BNB1103; BNB1104; BNB1105; BNB1105PB;
BNB1106; BNB1107; BNB1108; BNB1109; BNB1110; BNB1111; BNB1112; BNB1113; BTN1; BTN1G
Blind Nut first dash number | Anvil part number | "C" dia. | "M" dia. | Chuck part number | "M" dia. |
|---|---|---|---|---|---|
-440 | A27-440 | .210" | .113" | C2-5 | .113" |
-632 | A27-632 | .260" | .141" | C2-632 | .141" |
-832 | A27-832 | .300" | .166" | C2-8 | .166" |
-1024 | A27-1032 | .350" | .191" | C2-1032 | .191" |
-1032 | A27-1032 | .350" | .191" | C2-1032 | .191" |
-428 | A27-428 | .430" | .250" | C2-12 | .250" |
-420 | A27-428 | .430" | .250" | C2-12 | .250" |
-524 | A27-524 | .510" | .313" | C2-14 | .313" |
-518 | A27-524 | .510" | .313" | C2-14 | .313" |
-624 | A27-624 | .570" | .375" | C2-16 | .375" |
-616 | A27-624 | .570" | .375" | C2-16 | .375" |
-720 | A27-720 | .630" | .438" | C3 | N/A |
-714 | A27-720 | .630" | .438" | C3 | N/A |
-820 | A27-820 | .690" | .500" | C3 | N/A |
-813 | A27-820 | .690" | .500" | C3 | N/A |
Blind Nut first dash number | Min. Grip-1/2" grip range Mandrel part number | "D" dia. | "L" | 1/2" - 1" grip range Mandrel part number | "D" dia. | "L" | 1"- 2" grip range Mandrel part number | "D" dia. | "L" |
|---|---|---|---|---|---|---|---|---|---|
-440 | M01-5 | .111" | 1.80" | M1-5 | .111" | 1.80" | N/A | N/A | N/A |
-632 | M01-632 | .139" | 1.90" | M1-632 | .139" | 2.40" | N/A | N/A | N/A |
-832 | M01-8 | .164" | 2.00" | M1-8 | .164" | 2.50" | M2-8 | .164" | 3.50" |
-1024 | M01-1024 | .189" | 2.10" | M1-1024 | .189" | 2.60" | M2-1024 | .189" | 3.60" |
-1032 | M01-1032 | .189" | 2.10" | M1-1032 | .189" | 2.60" | M2-1032 | .189" | 3.60" |
-428 | M01-12 | .248" | 2.40" | M1-12 | .248" | 2.85" | M2-12 | .248" | 3.85" |
-420 | M01-420 | .248" | 2.40" | M1-420 | .248" | 2.85" | M2-420 | .248" | 3.85" |
-524 | M01-14 | .310" | 2.50" | M1-14 | .310" | 3.00" | M2-14 | .310" | 4.00" |
-518 | M01-518 | .310" | 2.50" | M1-518 | .310" | 3.00" | M2-518 | .310" | 4.00" |
-624 | M01-16 | .373" | 2.58" | M1-16 | .373" | 3.05" | M2-16 | .373" | 4.05" |
-616 | M01-616 | .373" | 2.58" | M1-616 | .373" | 3.05" | M2-616 | .373" | 4.05" |
-720 | M01-720 | .435" | 2.60" | M1-720 | .435" | 3.10" | M2-720 | .435" | 4.10" |
-714 | M01-714 | .435" | 2.60" | M1-714 | .435" | 3.10" | M2-720 | .435" | 4.10" |
-820 | M01-820 | .498" | 2.70" | M1-820 | .498" | 3.20" | M2-820 | .498" | 4.20" |
-813 | M01-813 | .498" | 2.70" | M1-813 | .498" | 3.20" | M2-813 | .498" | 4.20" |
Blind Nut first dash number | Anvil part number | "C" dia. | "M" dia. | Chuck part number | "M" dia. |
|---|---|---|---|---|---|
-440 | A28-440 | .210" | .113" | C2-5 | .113" |
-632 | A28-632 | .260" | .141" | C2-632 | .141" |
-832 | A28-832 | .300" | .166" | C2-8 | .166" |
-1024 | A28-1032 | .350" | .193" | C2-1032 | .191" |
-1032 | A28-1032 | .350" | .193" | C2-1032 | .191" |
-428 | A28-428 | .430" | .261" | C2-12 | .250" |
-420 | A28-428 | .430" | .261" | C2-12 | .250" |
-524 | A28-524 | .510" | .313" | C2-14 | .313" |
-518 | A28-524 | .510" | .313" | C2-14 | .313" |
-624 | A28-624 | .570" | .385" | C2-16 | .375" |
-616 | A28-624 | .570" | .385" | C2-16 | .375" |
-720 | A28-720 | .630" | .448" | C3 | N/A |
-714 | A28-720 | .630" | .448" | C3 | N/A |
-820 | A28-820 | .690" | .511" | C3 | N/A |
-813 | A28-820 | .690" | .511" | C3 | N/A |
Blind Nut first dash number | Min. Grip-1/2" grip range Mandrel part number | "D" dia. | "L" | 1/2" - 1" grip range Mandrel part number | "D" dia. | "L" | 1"- 2" grip range Mandrel part number | "D" dia. | "L" |
|---|---|---|---|---|---|---|---|---|---|
-440 | M01-5 | .111" | 1.80" | M1-5 | .111" | 1.80" | N/A | N/A | N/A |
-632 | M01-632 |