ZT4000 Right Angle Positive Feed Drill
Part Number: ZT4000
| Capacity: | Aluminum – Ø1.25″ (31.75 mm) |
| Steel -Ø.75″ (19.05mm) | |
| Titanium -Ø.75″ (19.05mm) | |
| RPM Options: | 230, 350, 550, 750, 1000, 2100, 3200 and 4500 RPM |
| Feed Rates (IPR): | .001, .002, .003, .004, .005, .006, .007 and .008 |
| Horsepower: | 1.75 HP |
| Stroke: | Minimum – .375″ (9.525mm) |
| Maximum – unlimited | |
| Air Volume: | 53 S.C.F.M |
| Features |
|---|
| Automatic retract and shut off at the completion of the drilling cycle. |
| Automatic start and shut off of the lubricant system during the drilling cycle. |
| Built-in nosepiece with 30 indexing mechanism. |
| Interrupted cut. |
| Multiple air inlets on motor housing. |
| Shortens drilling process per hole. Increase output and decrease production time. |
| Saves lubricant usage and clean up time and cost. |
| Easy indexing of tool for the best drilling position and saving time with set-up. |
| Chip removal for better hole quality. |
| Allows the operator to maximize accessibility and easily adaptable to all coolant systems. |